EdgeStar IB650SS Manual do Proprietário Página 11

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 10
EdgeStar Full Size Ice Maker 8
IMPORTANT:
Although the unit has been tested and cleaned at the factory, due to
long-term transit and storage, the first batch of cubes must be discarded.
Never turn the water supply tap off when the ice maker is working.
Never touch the evaporator when the machine is running.
Except to take ice from the unit, keep the door closed to reduce melting
and insure proper ice formation.
How the machine Makes Ice
Turn the power switch to the ON position. The machine will automatically
start the ice making stage. There are two distinct cycles: freeze and
harvest. During the freeze cycle, water is sprayed against the evaporator
surface. In the harvest cycle, the ice is released and water enters the
machine. A complete cycle can take 15 to 40 minutes, depending on
temperature and operating conditions.
Freeze: During the freeze cycle the compressor is pumping refrigerant,
the fan motor is blowing air, and the water pump is circulating water.
When the batch of ice has been fully formed, the ice maker stops the
freeze cycle and begins the harvest cycle.
Harvest: During the harvest cycle the compressor is still operating, but
the water pump has stopped. The hot gas valve opens, diverting hot
refrigerant gas into the evaporator. The gas warms the evaporator,
causing the cubes to slide, as a unit, off the evaporator and into the
storage bin. The freeze cycle will restart when all the cubes have been
harvested.
How the machine uses the water
The ice maker begins with a fixed charge of water that is contained in the
water sump. As the water is sprayed against the freezing evaporator
surface, the portion of water that does not contain mineral impurities will
freeze and stick to the ice cube molds. The water containing impurities
falls back into the water sump. Gradually, during the freezing portion of
the ice-making cycle, the water in the sump will become highly
concentrated with mineral impurities. During the harvest cycle, fresh
water flows into the machine to dilute the bin water and rinse the
concentrated minerals down the drain.
Vista de página 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentários a estes Manuais

Sem comentários